Deer are creatures of habit, and if a deer repeatedly comes to your garden to graze, chances are it will keep coming back for more. However, you cannot afford to get a commercial deer feeder from the local store because they’re simply overpriced. Fortunately, you have enough materials in your garage or storage room to pull off different DIY deer feeder plans using only 2-3 hours of your time. A DIY deer feeder can work wonders and are very effective.
Here are 25 DIY Deer Feeder Plans that are easy to build and fit for any backyard. The best part is these feeders don’t require a lot of tools or resources to complete. An old cardboard box, a wooden wine crate, some bricks, and bottles can serve as the best deer feeders if you know how to build them. A deer feeder is used to attract deer into a specific area for an extended time so that hunters are able to kill it.
DIY Deer Feeder Plans
Your idea of purchasing a deer feeder is to help you maximize your hunting season and improve the chances of making catches. Smart, right? But before you jump at the idea of getting a fancy commercial deer feeder, think again. Why spend more money than what’s necessary when you can build your own and enjoy life even more? There’s nothing wrong with being economical and practical. Read on if you’re looking for your own DIY Deer Feeder Plans! Building a deer feeder at home is just like cooking a meal from scratch. It’s best that you have a wide collection of DIY Deer Feeder Plans to choose from. When it comes to feeding deer, you always have to be prepared for both winter and summer.
It’s important to develop a feeding plan that will offer deer an unlimited supply of food in all types of weather. If you already have some sort of DIY Deer Feeder Plans that is working pretty well for you right now, don’t worry because we’re going to show you how you can improve on your current plan and customize it so that it works even better. After all, there are many materials and supplies that you can use in building one. Make sure to choose what fits your preferences and the amount of money you want to spend.
See Also: 17 DIY Horse Shelter Plans
How to Make a Homemade DEER FEEDER - DIY
So, are you a hunter and want to feed your own deer? Well, this article will show you how to build a homemade deer feeder on the cheap that is easily portable and less costly compared to the store-bought stuff. This is how to make a homemade deer feeder on the cheap! If you were wondering how to make a deer feeder, well here is your answer. This video will show you a fast and simple way to do so.
The best part is that it is easy to build with all the tips in this video. Are you thinking about making your own deer feeder? For those who have not thought of this, it is highly recommended to build your own. You can make your own feeder using basic materials found around almost every household. Making one out of fence posts containing hay and/or corn as a food source is super easy yet a tremendous option for feeding deer.
PVC Deer Feeder
The MOB shows you how to build a PVC deer feeder. This will take a little time, so grab a pencil and paper, watch the video and get ready to learn how to create a PVC deer feeder. The MoB returns with a complete build and basic PVC deer feeder setup. The first half of the video shows how to make the frame, then cut and assemble the plastic. The MOB will give you some tips on making your own mold. This entry-level build is by no means the last word in feeders, but it looks good and works well.
DIY Deer Feeder Plans
DIY deer feeders are a great addition to your backyard wildlife sanctuary. A deer and wildlife habitat is a great way to get involved in helping to better the environment while doing something you enjoy. Not only do you get to spend time with the family, but you can also enjoy watching deer graze on natural foods. Deer Feeders are a very handy tool in hunting! They allow you to feed and control what animals come onto your property. A quick and cheap idea was for two people to spend about 65$ on these DIY deer feeders.
See More: 60 Best DIY Backyard Ideas For 2022
How to create a Deer Feeding Trough that refills itself for cheap
It is a deer feeding trough that refills itself from tree water, creeks, and ponds. The water flow pushes a float to open a valve that lets in more water. It has a timer to control the refill rate. You need bubble gum, PVC pipe, and a few other things. First, dig a hole in the ground in the forest. Don't make it too big. The size depends on how much food you are planning to store. Next, put Gorilla tape around the edge of the hole to stop the dirt from caving in.
Then cut up some 4-inch diameter pipe into pieces about 4 feet long and make your first stand for the PVC pipe. Put it anywhere you like inside of your hole. It doesn't really matter where you put it. Then put another piece of pipe upright alongside the first one, so they cross each other vertically. This will be used as support for your third pipe. Now place the third piece of pipe on top of them, and voila! You have made your first stand for the PVC pipe!
DIY Wood Box Feeder With Removable Lid
A wood box feeder with a removable lid creates a sturdy and versatile feeding station for deer. This DIY project can be made in an afternoon and includes three sets of plans for the box. The plans include a detailed drawing to help you cut out the pieces, a recommended material list for cutting costs, and step-by-step instructions with pictures to help you follow along. This box can be used to build a DIY wood box feeder with a removable lid, which is perfect for wild animals like deer and rabbits.
This feeder features strong and sturdy construction, which includes several pieces of wood screwed or nailed together. It has a sloping front to create a triangular bin with a ¾-inch wide opening to control the flow of feed. The lid at the top is removable, so you can fill the food easier. Add hooks and wire mesh on the sides to keep animals in while they eat, and mount the unit at least 16 inches above the ground. The included plans also provide additional modifications to create other types of feeders like a double-sided lid or a door.
Project details: feltmagnet.com
How To Build A Deer Feeder
This roofed feeder is made to provide a protected feeding station for deer. To make feeding deer a relaxing and fun activity, we supply a diagram with instructions to build a plywood-and-wooden-table roofed feeder in your backyard. This structure contains two pans, seven different mounting spots along a dining area on the upper level. Deer and other wildlife will appreciate the shelter of the rooftop while they enjoy their treats. A plywood roof slants down over the top of the table, which provides a weatherproof covering.
Project details: howtospecialist.com
PVC Pipe Deer Feeder
Deer feeders are a great way to attract deer to your yard or property, but this requires regular maintenance. This project is easy to make and can be hung from a tree or pole. It's a cheap solution that doesn't require any extra material besides PVC pipe, caps, and metal wire. This PVC pipe deer feeder provides the perfect solution for a safe way to feed your deer and other wild game in a very short time. With just a 2-inch diameter PVC pipe, two caps, and string or wire you can create a feeder that is easy to make and will keep your deer coming back for more. Deer are naturally attracted to PVC pipes because of the earthy smell, so there is no need to add any flavorings. The kit comes with step-by-step instructions and a template to make this beginner-friendly project even easier to tackle!
Project details: instructables.com
DIY Corn Trough Deer Feeder
Get the most from your natural resources by building a protein trough to feed deer and small game in large numbers close to your home. A protein trough is the most visible feature of any deer feeder and can be constructed in a variety of materials. A 55-gallon plastic drum cut in half is a popular choice and is inexpensive. Embed the edge of the lid with 4x4-inch boards, and then nail on ¼-inch hardware cloth to keep out rats or other unwanted wildlife. These feeders are raised from the ground to keep rainwater from leaking into the trough. To ensure your homemade deer feeder will stand the test of time, make sure to use durable material and proper fasteners.
DIY Trough-Style Deer Feeder
Have you ever considered making your own deer feeder? You will be surprised at how easy it is to make a trough-style feeder for less than $50 in materials. This DIY Deer Feeder is well-built and can accommodate up to 200 pounds of deer food. If you’re looking for a low-cost alternative to a metal deer feeder, this DIY Trough-Style Deer Feeder is a fairly simple and elegant option. This deer feeder's roof is made of metal roofing scrap, which can be purchased from your local construction store for about $25 and is light enough for one person to carry in a hand truck.
If metal roofing isn’t available in your area, consider using metal stock or even welding wire instead. While the hardware store may not carry metal roofing in as wide of a variety of colors as you might find when working with metal stock, it will work and if money is tight, it can be used to save some funds.
Project details: mossyoak.com
Tripod Barrel Homemade Deer Feeder
Planning to feed a large number of deer? Filled with corn, oats, or other feed suitable for deer, your homemade deer feeder can save you money while encouraging these majestic creatures to hang around your home. This tripod barrel feeder will do a great job. It is made of durable and solid pipe, which can easily be mounted on some sturdy, strong, and stable tripods. The 3-head feeding tube lets each deer eat separately without the risk of getting caught up with the others.
This tripod barrel deer feeder is a do-it-yourself (DIY) project that can help you master your hunting skills. It allows you to attract or train deer for hunting, aid your hunting dog to catch food, or help you feed your pets. You can simply bolt it together with four bolts, then fill up or change the food easily when needed. The tripod barrel deer feeder is made of galvanized steel pipe and a wood barrel to make it lightweight, sturdy, and long-lasting.
DIY 5-Gallon Bucket Deer Feeder
Sometimes a simple, ingenious idea is the best. Nothing holds this more true than the DIY 5-gallon bucket deer feeder.No tools or construction skills are required for this cool DIY deer feeder. Feeding time is never a battle with this simple feeding mechanism that requires only a bucket, some ropes, a can at the bottom, and a piece of wood to keep the powder dry. The deer lifts the bucket and makes corn or grain fall through the hole of the bucket by nudging it, but make sure the hole is big enough for the rod and grains to fall through. You can make this at home; all you need are buckets, ropes, and a piece of wood.
Project details: diyjoy.com
Homemade Deer Feeder Plans
If you are looking for a feeder that’s not too big and not too small to make at home, then the following deer feeder plan should do the job. The feeder is called a trough-style deer feeder and features a tray measuring 22 ½ by 47 – inch long panel. The DIY feeder you can build from plans is a trough-style, offering an appearance that’s more appealing to deer. It also has a built-in roof made from overlapping slats of plywood, thus protecting the floor underneath from weather conditions and increasing its chances of survival. This deer feeder plan will be a great project with your whole family.
After it is constructed, the trough-style feeder is made even more attractive by adding slats that overlap each other on the roof. This Homemade Deer Feeder Plan will show you how to make a deer feeder that is operable. The plans come with illustrations and detailed instructions to make this deer feeder easy and inexpensive to build. The paneling on the front, combined with the roofing slats, will keep rain and snow from entering the trough.
Project details: myoutdoorplans.com
Covered Wooden Deer Feeder
You can build this heavy-duty deer feeder if you have access to a miter saw, woodworking skills, and 4×4 lumbers. This Covered Wooden Deer Feeder is a nice addition to your garden or yard. It can feed up to 25 deer, thanks to the long 60-inch slats and the large feeding tray. It’s assembled from 4×4 lumbers for the legs, a 2×6 frame using 2×6, 2×4, and 1×4 lumber for its integrity, and 60-inch slats. after that, use your belt sander to smooth their edges and make them flat for proper installation.
To finish the project with a great aesthetic value, sand all lumber pieces until they are smooth and paint them in white or black--your choice. It’s built to last for years, even through harsh weather conditions. This deer feeder will give it both form and function: Its roof is covered with 60-inch slats that will prevent mud from building up and allow water to pass through while also offering shade.
DIY 5-Gallon Deer Feeder
If you are seeking an easy deer feed solution, you might consider this DIY 5-gallon deer feeder. Moving deer can be a very hard thing to do. The key has the right bait. This DIY 5-gallon deer feeder is easy to build, can store up to 50 lbs of corn, and uses a 45-degree elbow to feed the deer conveniently throughout the day. It’s built simply and efficiently with a 5-gallon bucket and a small wooden dowel.
This inexpensive feed solution for deer is very easy to make and very low maintenance. The concept of this DIY deer feeder is not new, but it works very well for the deer to enjoy their food without wasting any quantity. It takes only a few minutes to make this homemade DIY 5-gallon deer feeder. All you need is a bucket and some common items. Since the basic design is so easy, there are many different things that you can do to customize yours. It’s one of the most popular deer feeder designs, in fact, it’s been on various blogs as well.
Project details: fivegallonideas.com
Cheap Deer Feeder With 5-Gallon Bucket And PVC Drain Pipe
A deer feeder is an invaluable tool for deer hunters, safe and easy to make at home. You can use five-gallon buckets as the body of your feeder because they are round, sturdy, and leak-proof. You can purchase these buckets at local stores for less than $10 each. A 2-inch diameter PVC pipe is secured on the center of the bucket’s lid. Cut a hole in its center. Fill up the pipe with corn grain or soybeans until it spills off the ground when you tilt the bucket. Make adjustments to avoid spillage.
If you’re looking for a cheap feeder, you have come to the right place! This DIYer came up with a great solution using a 5-gallon bucket and PVC pipe. This is one of our favorite DIY feeders because it’s so cheap and easy to make. It uses a common setup that you can find in many other DIY projects.
DIY Feeder With 6-Inch PVC Wye
Do it yourself? Tired of having your feed destroyed and scattered by the wind or eaten by mice, squirrels, and birds? Well, this homemade PVC deer feeder is for you. The most challenging part of making a PVC deer feeder is attaching the PVC Wye to the tree. This simple construction, which is easy to make with a few simple tools and basic materials, has one big advantage: it allows deer to access their feed via a large pipe with several openings. Otherwise, this project is a breeze, requiring just a drill and hand saw.
The feeder holds 40 pounds of food, but it's not exposed to the elements. Instead, feed drops through the open end of the Wye into a PVC tube that is attached to your tree or post. For best results, stake or tie off the PVC tube near ground level to hold it upright while allowing easy access for deer to feed.
Tripod Deer Feeder With Metal Barrel
Here is a deer feeder made from a 55-gallon barrel on a tripod with the barrel placed on top of the tripod. This feeder kit lets you set up a system that automatically feeds deer upon an alarm. It’s so easy to install. The 55-gallon barrel is made of metal and will hold up to 30 pounds of feed. Simplify your deer feeding process with a 55-gallon metal barrel tripod feeder. This large stand offers the advantage of stability, large capacity for small groups of deer to feed at one time, and a feeder kit that allows you to set up automatic feeding on a schedule.
As an added bonus, this feeder will fit on top of most other 55-gallon barrels you already own. The deer feeder will help you keep your yard tidy and away from messy waste. All the parts are weatherproof and rust-resistant, including the barrel and tripod as well as the feeding kit at the bottom.
Free Choice Deer Feeder
This Free Choice Deer Feeder is designed as a simple and convenient way to feed your deer. Featuring an unconventional design that allows many deer to come and grab a bite freely, this wooden feeder provides space for around 200 pounds of deer feed. Additionally, it has a durable metal roof that can easily be raised or lowered at any time during the season. It’s ideal for keeping deer well fed before Archery Hunting Season so you can hit the ground running when you're ready to start putting arrows on target for big trophy bucks on your bowhunting land.
It is an excellent choice for feeding deer in your yard, enabling multiple deer to feed at once. It is a raised wooden box with a continuous flow of free-flowing deer feed. Although this item is not recommended for those interested in attracting only deer to their property, the elevated design allows many other animals, such as squirrels, to gain access, so keep this in mind before purchasing.
Project details: mossyoakgamekeeper.com
You can also see: DIY Archery target ideas
55-Gallon Feeder With 4 Feeding Slots
This 55-gallon drum is a great feeder for deer and other animals. It’s made of heavy-duty steel and includes four 12-inch drywall mud trays with holes on the bottom that connect to an elbow on the barrel’s bottom. All you have to do is mount them in four directions and fill each tray with food. It comes with easy-to-install straps that hold the drum in place without the need for drilling holes in it. The straps you tie will hold the barrel on the ground and allow holes to stay open easily. If you carry out this project during fall, your deer feeder will be ready for winter. This is an ideal unit for deer or other wildlife needing food. The barrel is painted the same color as the metal U-bolts for rust proofing and easy application.
DIY 55-Gallon Feeder With 4-Inch PVC Tubes
This feeder is a great way to get started with a DIY project. The construction of this 55-gallon feeder is a bit different from the above, because of the unique tubing system. The use of a plastic barrel; however, is the same. It's just a matter of imagination… This 55-gallon barrel feeder was constructed with a total of four elbows, two 2-inch PVC nipples, one 65-degree elbow, and one 23-degree elbow. The feed will drop from the top of the barrel and slowly work its way down into the 25-square-foot mat that fits perfectly at the bottom of this DIY feeder.
A single PVC pipe comes out of each corner and is anchored by heavy plastic to prevent deer from tipping this feeder over. This project provides the advantage of a feeder barrel with an excess of hose so you can add some extra hose on the end to provide more surface area for the deer to eat on.
PVC Gravity Deer Feeder
This article will show you how to make a PVC gravity deer feeder. The feeder can be made using PVC pipes, fittings, glue, and straps. Adjust the height of the stand according to your preferred feeding level. The feeder rack hangs onto the pipe with gravity, so less feed falls on the arm as it fills up. Enjoy watching deer and other animals feast on your customized PVC deer feeder while effortlessly saving money on feed. This DIY PVC Gravity Deer Feeder is an easy way to attract deer to your property. Unlike some other DIY feeders, this one does not require any power or manual labor since it relies on gravity to work.
Note that it fits best on trees with large trunks and that you have to cut pieces of PVC pipes to fit the deer feeder onto the tree correctly. All you need is a trip to the hardware store and some basic tools to build the PVC pipes into an airtight container with a hook at the bottom to hang them. The food stays dry inside, and when filled, gravity pulls the berries and nuts onto the ground for feeding.
Project details: discover.hubpages.com
DIY Deer Feeder With A PVC Head
A storage barrel can provide a deer feeder that is both simple and inexpensive. Do you have a backyard and it is also filled with deer? If that's the case then you should know how to make a DIY Deer Feeder With A PVC Head. This DIY deer feeder is easy to build and features a PVC pipe attached to a barrel feeder. This drum serves as a place where deer can eat their food. The height of the PVC pipe can be adjusted so that it is suitable for various sizes of deer.
For deer feeder projects that are easy, fuss-free, and inexpensive, the PVC head deer feeder is a good choice. To build this DIY project you need to invest in only a couple of PVC pipes or connectors and some screws. A handful of PVC fittings can serve as the feet for the feeder, which prevent it from sinking into the ground and allow enough water drainage. This feeder can be made with minimal woodworking skills or tools and placed at the edge of woods, near your garden, or any other location where you wish to attract some deer.
DIY V-Shaped Deer Feeder
These plans show how to build a DIY V-shaped deer feeder. The instructions outlined in this plan will help you build a deer feeder made of 22 pieces of long balusters. The length of these balusters is 6 to 8 feet, and they create a graceful V shape that’s best to provide some relief to your animals’ joints. Now you can build your own unique deer feeder with this detailed and well-illustrated plan. The V-shaped feeder design includes 22 pieces of long balusters in a symmetric layout that allows you to attach them to the sturdy base simply. Start this project with an accurate measurement of the posts, and you’ll find that the roof is quite easy to build. Assembling roof supports will take a bit more demanding work, but if you do everything properly, the project should take one or two days at most.
Project details: myoutdoorplans.com
30-Gallon Barrel Deer Feeder
You don’t need a high-end feeder to keep your game fed. Many people use plywood scraps and drill holes into them for their feeder. They don’t realize the continual damage it can do to the wooden surface, whether it be through leaks or natural wear and tear. This guide takes you step-by-step on creating an ingenious feeder out of a simple 30-gallon barrel. An affordable, effective way to provide a group of deer with a plentiful and readily-accessible food supply. Find a 30-gallon empty plastic barrel. Clean it and plug up the holes, but leave one on the bottom to place a feeder in it from the pet store. Cut the top half of this clean plastic barrel 2 inches down.
You may want to put some scrap wood about 8 inches up from the bottom to keep food from falling out. Then build a frame for this half by using five four-foot pieces of 2×4 lumber and attaching them together with screws. Screw 1×1 strips of wood along the front of these boards, where the roof ledge will eventually rest, keeping your base together and strong. Cut a roof out of 2×4 lumber 22 inches long that can support roofing felt and cut a gutter along its edges.
Screw this back onto your four-foot pieces of 2×4 lumber. So they are flush against each other (you may wish to use a clamp). Then snap on your plastic roof, leaving space at either end for placing strap hinges. These hinges should fold up into little crescents under the roof if you have placed this correctly. Place two one-inch bolts on either side near the top of your strips so they can hold the roof down tightly when not in use.
Covered Deer Feeder
This deer feeder is a great addition to your homestead. This deer feeder has a roof that will keep the deer food from the rain and snow. And discourage the skunks from taking the food. A setting that creates a natural strength and quality is the best. That's why the deer feeder construction plans have been carefully thought out to produce an entertaining product. That has the ability to hold both small and large bucks, adjusting accordingly to accommodate them. To ensure a safe place for the deer, only choose a design that will test many times. To ensure no buck gets his/her antler stuck in the roof as they are eating or starving for nutrition. This design is perfect for antlerless deer too. Your buck can eat peacefully, knowing he doesn't have a target on his back.
Project details: hurleybyrd.com