You can save a lot of money by building your fume hood instead of purchasing an expensive one. DIY fume hood projects are a great addition to any workshop that works with chemicals and dangerous fumes. They can significantly improve the quality of air in your garage or workshop, even if you don't have any dangerous materials. And they're an awesome conversation piece! The design and construction of your own home-built fume hood can save you thousands of dollars versus the cost of commercial alternatives, and when built properly, will provide you with a safe way to work on projects. Do-it-yourselfers have plenty of tools available to help them with projects at home.
DIY Fume Hood Projects
How to build a fume hood can be dangerous if you don’t know what you’re doing, so carefully consider if this project is for you. Make sure that the area in which you want to install your ductwork is measured and fully prepared before getting started. If it isn’t, call a professional as quickly as possible to ensure that everything is placed properly and safely.
If you are a chemist, pharmacist, or science tech who doesn’t have a chemical fume hood, this is your guide to building one. We have over 15 different ideas all relating to DIY fume hood projects, varying in pricing and amount of work. Check out our selection, pick one that works for you, and start the process of making one yourself! There are detailed instructions for assembling each hood, so it shouldn’t matter what your level of carpentry is. Simple tools should be enough to construct a box-style filter-equipped chemical fume hood.
How To Make A Soldering Smoke Absorber
Make a small soldering smoke absorber that can be attached to a drilling platform. Just build a small fan box of cardboard and paint it black with acrylic paint. Then attach an upright tube to the side of the box and change the place around you. The filter is made of cardboard and could end in a variety of ways. In this seven-minute video, you will learn how to make a simple, homemade smoke absorber to filter out harmful smoke from soldering. This portable box is constructed with just cardboard, a regular fan, and a tube for an exhaust that can be attached to a window.
DIY Fume Hood
Learn how to build a DIY soldering fume and smoke extractor fan. Take a look at this easy-to-do DIY soldering fume and smoke extractor fan tutorial. You can use a hairdryer, vacuum cleaner hose pipe, clips, funnel, tape, and an adjustment bar. After putting the materials together, you can clip the fume hood to your workbench easily."
Homemade Chemical Fume Hood
This Homemade Chemical Fume Hood is a cool DIY project for the maker in you. It's upcycled from reclaimed wood, will be perfect for your electronics lab, and looks great after some sanding and staining. This fume hood has no bad fumes, but it does have an exhaust fan. This DIY fume hood is made from reclaimed wood and has a top platform to place items on. An exhaust fan is included and needs to be mounted on the top of the box in such a way that it will blow air out of the side of the fume hood. Once all of these pieces are in place, your homemade chemical fume hood will be ready! We think you'll love this stylish and functional three-sided box.
How To Make A Fume Hood
This is an amazing fume hood that is safe, quick, and easy to make. Follow this guide to create your own fume hood. Don't feel obligated to follow our technique exactly. Get into the work and do it as you like. This DIY fume hood guide is for those who want to build a fume hood with no arrangement. A fume hood is important in any laboratory to protect the laboratory technician from toxic or flammable fumes. Many fume hoods, however, are expensive and are out of stock in times when you need them quickly such as during an emergency.
But not when you have this guide to help you create your own fume hood. This fume hood has a serviceable area of 24 inches by 14 inches and has a removable downdraft table that makes it easy to clean up spills. It's well-built, shiny, and only costs about $150 to make.
Building A Fume Hood At Home
Is there such a thing as a cardboard fume hood? Yes, you read right. In this video, the fan box and the fume hood itself were made from cardboard boxes. It's not perfect, but it works. This video will show you how to make an amazing fume board that can be used for different purposes, for example, for a school science project or for your kids to learn simple science experiments at home. The materials needed are very cheap and easy to find, like a cardboard box and four pieces of wood. And a fan as well. Step by step, you will be able to make a fume board, the same one the presenter made in this video. It is coming along very well, isn’t it? You can enjoy safe chemistry experiments right at home!
Portable Fume Hood DIY
Making a fume hood will produce nasty fumes. In this video, the creator demonstrates how he built his portable fume hood from an old desk. The fan box is made from a salvaged squirrel cage. He explains that you will need a list of materials, including cordless drill, soldering iron, under cabinet fluorescent lights, exhaust ducting and dryer vent, pegboard, masking tape, and miter saw. He provides tips on how to go about making the hood. hen start cutting down the boards into pieces for the fume hood. Add some soap and water to the fluorescent light fixtures to make them easier to see. On the two side pieces, cut out two holes for the handhold/handle.
DIY Fume Hood
For your scientific experiments, you need a good fume hood. This is a practical DIY experiment box made with simple materials such as wood and wood glue. Get started as you bring the size of the fine hood you need. Before you begin this project, you must decide how large your fume hood should be. For example, this is 4feet wide and 36 inches tall. You need to make the main box from ¾" thick wood, 4 pieces screwed together at the corners. The next part is the bank made from pieces of ¾" plywood. Another box made from ½" wood gives room for air to flow behind the fume hood. The last part is the frame wood that makes up the front of the fume hood.
DIY Small Fume Hood
Learn how to make your own fume hood. Fume hoods are used in chemistry labs to safely work on projects that create harmful fumes such as those from acids or solder. This is a small fume hood built inside of a wooden box and mounted on top of a cart for easy portability. This fume hood is made using a range hood, an inexpensive cart, assorted fastener (including wood screws, self-tapping screws, and other fasteners), duct tape or Gorilla Tape, wire nut, plexiglass (c. 0.1’’ thick), and 2 prong extension cord with plug. The unit is built to allow ventilation by a shop vacuum or blower. Follow the guide to build your own fume hood. It has a plexiglass front window so you can see it. After the box is done, installation of electrical and ventilation hookup will follow
Cheap 3D Printer Fume Hood
In this project, you will learn how to build your own fume hood. This fume hood does not cost much to build! But thanks to one of our awesome Instructables users, you can now recycle some materials to create your own fume hood at a very minimal cost. Follow this guide to make your own 3D printing fume hood so you can stop inhaling those harmful fumes and protect your health. Recycle the materials that you already have for this fume hood project. Get a circular saw, drill, jigsaw, screws, and ¼” plywood. Cut the components out to create the frame using plywood. It is not difficult. First, get all materials. Second, create the frame using plywood. Third, install the fan/blower and modify it to fit on the frame. Fourth, connect all pipes together. Finally, examine by a professional to ensure everything is okay.
DIY Fume Hood With Foot Pedal
This project represents a fairly simple, not too expensive, and yet very efficient DIY fume cabinet with a foot pedal sensor. It has a compact design that can adapt under desks, on a stand, or hung from the wall. It’s good for home laboratory projects, providing you with enough storage space without consuming too much space in your home. The DIY respirator cost is quite cheap, and the construction itself is easy. This fume hood is designed to help you remove toxic gases safely and easily. This can be completed in 1hour, and the total cost is between $85-$110.
You can also see: DIY Gas Sensor Ideas
DIY Low Budget Fume Hood
You are less likely to suffocate when you have a fume hood at home. Suffocation is mostly because of the fumes that humans produce while cooking. Chimneys are designed to release these fumes in a harmless manner outside the house. Without one, these fumes leak into our lungs directly. Most of these chimneys are expensive; therefore, DIY low-budget examples such as this have come in handy. You need a few household materials and some silicone sealant in this one.
Low-budget fume hoods are easy to design at home if you have all the required materials. First, assemble a cardboard box and silicone it together. Then mount the blower motor with a fan guard on top of the box. Ensure that you seal the edges with silicone to prevent air from leaking. Connect the blower to a power source and direct the air vent towards the tabletop. Lastly, drill two holes at the back of the box one for of a hosepipe and another for power cords. Cover them with plastic covers to avoid injuries.
You can also see: DIY Chimney Cap Projects
Solder Fume Extractor DIY
Welding Fume Hood Extractor
Making a welding fume hood is quite easy, especially if you have all the essential materials and tools. How to build a fume hood? Fume is a gas that is given off during the welding process. Those gases can be harmful, so you need a fume hood. To build one, you need an air handler, mini-fridge, 4" PVC pipe, drainage hose, and power switch. Forget expensive fume hoods. You can make this at home. Follow these simple steps: Remove the blower motor and other electrical components required for the fan to work. Now that's one less thing to worry about! Reconfirm reassembling your new system and installing the electrical components. After that, test out your new fume hood by finishing all the remaining steps.
Fume Extractor DIY
If you've started working on your own electronic circuits, then you'll need an inexpensive DIY Fume Extractor to work in comfort and safety. All you need is a power supply with a fan, active carbon impregnated foam, and some brackets to hold the power supply in place. We have an easy-to-follow guide below that can help.
DIY Solder Fume Extractor
Fume extractors are needed to remove all fumes emitted by chemicals like solvents and other materials that could be hazardous to our health. If you have a 3D printer, you can make a really cool one for yourself in 15 minutes. And do the environment some good by recycling all the parts you will use from old, scrap materials! If you're looking for a way to purify the air around your worktable, then you'll want to assemble this solder fume extractor. By adding an active carbon impregnated foam, it's easy to collect a lot of soldering fumes and other toxins without requiring extensive modifications to your workspace. Just add the paneling and do all your work with better air quality all around you!
